Automation Storage System Based On SCADA Using PLC CP1H and CP1L

Gun Gun Maulana, Ridwan Mada, Regim Ramaya Purba


The warehousing system is a means of supporting production activities and industrial operations that function to store goods to be distributed, which are still using a manual system and must adapt to technological developments. The problem that often arises in the warehousing system that is still done manually is that the flow of goods into the warehouse is not well organized, and this makes it difficult when the goods are about to be removed, so it requires a longer search time. Previous research has shown actual data on storage racks that use Arduino Mega as a controller and VB as an interface, but there is no actual data on the state of the lifter or the selection of lifter movement speed modes to facilitate operators in monitoring and operating goods storage. Control systems with industry standards greatly affect the effectiveness and optimization of the production process. Based on these problems, this research aims to simplify the managerial and monitoring process in the warehouse with a prototype of automatic multilevel storage using PLC CP1H and CP1L as system control and Wonderware Intouch as an interface with the SCADA system. The prototype has 12 cells, and each cell can accommodate 2 boxes; each cell is distinguished by the height and color of the box. In testing this research, the SCADA system can work optimally. The interface is capable of displaying the actual data of the rack with a success rate of 100%, the hardware error rate is less than 1%, and the interface can display the actual data on the state of the lifter.


Warehouse; SCADA; Wonderware Intouch; PLC

Full Text:



L. N. Zulita, “152072-ID-none,” vol. 12, no. 1, pp. 89–98, 2016.

S. Milwandhari, “Warehouse Management System Berbasis Android,” J. Sos. Sains, vol. 2, no. 1, pp. 28–39, 2022, doi: 10.36418/sosains.v2i1.293.

A. Tamsir, “Development of Automatic Storage Retrieval System for Variable Loads,” J. Sains, Teknol. dan Ind., vol. 18, no. 1, p. 99, 2021, doi: 10.24014/sitekin.v18i1.11587.

H. Prasetyo and W. Sutopo, “Perkembangan keilmuan teknik industri menuju era industri 4.0,” Semin. dan Konf. Nas. IDEC, vol. 2017, p. 500, 2017, [Online]. Available:

G. G. Maulana, A. Budiyarto, and Ridwan, “Design Implementation Andon for Production Monitoring System Based on Internet of Things,” Int. J. Eng. Technol. Manag. Res., vol. 8, no. 12, pp. 69–79, 2022, doi: 10.29121/ijetmr.v8.i12.2021.1083.

S. K. Dewantoro, “Penggunaan Antarmuka Labview dan Mikrokontroler untuk Pengaturan Kecepatan Motor DC.”

K. Khotimah and Sriyanto, “Perancangan Dan Implementasi Data Warehouse Untuk Mendukung Sistem Akademik (Studi Kasus Pada STKIP Muhammadiyah Kotabumi),” J. Teknol. Inf. Magister Darmajaya, vol. 2, no. 01, pp. 94–107, 2016.

A. Candra, “V12 n3,” no. July, pp. 687–699, 2021.

A. Prasetyo, T. Informatika, and U. Muhammadiyah, “Infrastructure As Service Dengan Kendali Raspberry Pi,” J. Ilm. NERO, vol. 2, no. 1, pp. 27–35, 2015.

M. I. Gunawan, “Sistem Kendali Otomatis Pada Mesin-Mesin Industri,” Tedc, vol. 9, no. 2, pp. 110–116, 2018.

M. Riski, A. Yanuar, and B. Santosa, “Gudang Barang Jadi Pt Xyz Dengan Penerapan Racking System Untuk,” J. Rekayasa Sist. Ind., vol. 3, no. 4, pp. 25–31, 2016.

A. Haslindah, F. Fadhli, A. Adrianto, and R. Mansyur, “Pengaruh Implementasi Warehouse Management System Terhadap Inventory Control Finish Good Berbasis Barcode Pt. Dharana Inti Boga,” ILTEK J. Teknol., vol. 12, no. 02, pp. 1760–1763, 2017, doi: 10.47398/iltek.v12i02.378.

S. Sarifuddin and N. Yanti, “Implementasi Programable Logic Control Dan Wonderware Intouch Untuk Otomasi Smart Home,” JTT (Jurnal Teknol. Terpadu), vol. 2, no. 1, pp. 55–60, 2014, doi: 10.32487/jtt.v2i1.41.

G. G. Maulana, H. Rudiansyah, and S. N. Tazkia, “Automation Forklift System untuk Penyimpanan Produk pada Gudang Berbasis Labview,” J. Tek. Inform. dan Sist. Inf., 2020, doi: 10.28932/jutisi.v6i1.2334.

R. Fitriadi, A. Al Ghofari, and G. Kuncoro, “Modul Sistem Kontrol Industri Menggunakan PLC,” Semin. Nas. IENACO, pp. 272–280, 2014, [Online]. Available:


H. Wicaksono, R. Lim, and W. Sutanto, “Perancangan SCADA Software dengan Wonderware InTouch Recipe Manager dan SQL Access Manager pada Simulator Proses Pencampuran Bahan,” J. Tek. Elektro, vol. 8, no. 1, 2009, doi: 10.9744/jte.8.1.38-45.

J. Gausemeier and S. Moehringer, “New Guideline VDI 2206 – A Flexible Procedure Model for Specific Requirements to the Design of Mechatronic Systems,” Int. Conf. Eng. Des. Iced 03 Stock., p. 10, 2003.

I. Graessler and J. Hentze, “The new V-Model of VDI 2206 and its validation das Neue V-Modell der VDI 2206 und seine Validierung,” At-Automatisierungstechnik, vol. 68, no. 5, pp. 312–324, 2020, doi: 10.1515/auto-2020-0015.



  • There are currently no refbacks.

View My Stats


Creative Commons License

Jurnal Rekayasa Elektrika (JRE) is published under license of Creative Commons Attribution-ShareAlike 4.0 International License.